Welch Allyn Propaq LT, Propaq CS and Micropaq monitor, Radio Configuration - Installation Guide - Manual (Page 13)

Radio configuration guide 80016835 Ver A 13
8. Click EAP Settings from the options on the left. The EAP Settings screen appears.
9. Select the EAP type you want to use, enter an identity and a password, and click
Apply.
10. If you are using a network with a pre-shared key (PSK), do the following:
a. Click WPA2PSK from the options on the left. The WPA2PSK screen appears.
b. Enter your WPA2PSK key or passphrase and choose your format.
c. Click Apply.
11. Restart the monitor.