Welch Allyn Service Tool, Installation and Configuration - Installation Guide - Manual (Page 18)

Welch Allyn Service Tool 15 Chapter 3 Operation
Accessing the service tool
Log on for the first time
1. Go to the Windows Start menu and select All Programs >
Welch Allyn > Welch Allyn Service Tool.
2. Click Service. The Login dialog displays, with ADMIN as the user
ID. No password is required for the initial logon.
3. Click Log on.
4. Set a password for the ADMIN account:
a. From the drop-down menu, select Administration >
Manage accounts.
b. Select ADMIN and click Edit.
c. Click Change password. The Change password dialog
displays.
d. Enter a password in the Enter new password box, then
confirm the password by entering it again in the Re-enter
password box.
e. Click Save.
You can now use the service tool. For information about creating
more user accounts, select Help > Service Tool help > Menu
options > Administration menu.
Note Record your password and save it in a safe place.