Welch Allyn Service Tool, Installation and Configuration - Installation Guide - Manual (Page 8)

Welch Allyn Service Tool 5 Chapter 2 Installation
Network requirements
When you use the service tool to license or download firmware,
network traffic travels over non-registered ports. You must open
these ports for TCP/IP and UDP traffic on your PC or network
firewall:
Before you begin
• Verify that this computer meets the hardware and software
requirements listed in System requirements.
• Verify that you have administrator rights for the computer.
• Close all programs before starting the installation.
• If you have a previous version of the service tool installed on your
PC, uninstall it as described in
“Uninstalling applications” on
page 18.
Installation
The installation media (such as a CD, DVD, or flash drive) for the
service tool consecutively installs the following programs:
• Welch Allyn Service Tool
This tool completes the full suite of functional tests.
• USB driver
This program allows Welch Allyn devices to connect to a PC
for testing.
Ports Description
5093, 5094 Welch Allyn licensing server
5920 Welch Allyn PartnerConnect server
Note To open these ports, consult your network administrator.