Workrite Fino - Manual (Page 3)

Workrite Ergonomics | 800.959.9675 www.workriteergo.com 3
Fino Installation Instructions
Get to know your Fino
Determine which Fino you have purchased. There are 4 standard configurations. The information
below list these configurations and their corresponding skus and parts layout. After mounting
the Fino lights in step 2, proceed to the connection step listed for your configuration.
1
a
Chain without Occupancy Sensor, go to step 5
Chain with Occupancy Sensor, go to step 6
FIN-24-P-ODC-W
FIN-24-P-ODC-C
FIN-24-P-ODC-S
FIN-36-P-ODC-W
FIN-36-P-ODC-C
FIN-36-P-ODC-S
FIN-48-P-ODC-W
FIN-48-P-ODC-C
FIN-48-P-ODC-S
With Occupancy Sensor, go to step 4
FIN-24-P-OCC-W
FIN-24-P-OCC-C
FIN-24-P-OCC-S
FIN-36-P-OCC-W
FIN-36-P-OCC-C
FIN-36-P-OCC-S
FIN-48-P-OCC-W
FIN-48-P-OCC-C
FIN-48-P-OCC-S
Without Occupancy Sensor, go to step 3
FIN-24-P-W
FIN-24-P-C
FIN-24-P-S
FIN-36-P-W
FIN-36-P-C
FIN-36-P-S
FIN-48-P-W
FIN-48-P-C
FIN-48-P-S
Parent
Parent Master
Switch
Jumper
Jumper
FIN-24-P-W
FIN-24-P-C
FIN-24-P-S
FIN-36-P-W
FIN-36-P-C
FIN-36-P-S
FIN-48-P-W
FIN-48-P-C
FIN-48-P-S
Stand-alone
Daisy chain Parent Daisy chain Jumper
Cable length
- 1”
-12”
-24”
-48”
Color
-Winter
-Sterling
-Carbon
FIN-24-J - -
FIN-36-J - -
FIN-48-J - -
All model numbers for this configuration
FIN-24-P-W
All model numbers for this configuration
FIN-24-P-OCC-W
All model numbers for this configuration
FIN-24-P-W
All model numbers for this configuration
FIN-24-P-ODC-W
Look for -P- for “Parent”
Look for -OCC- for “OCCupancy sensor”
Look for -P- for “Parent”
Look for -ODC- for “Occupancy on Daisy Chain”
Chain Jumper models, go to step 7
Occupancy Sensor
Note: These model #s also apply to daisy-
chain parent units. The configuration shown
above is for a single, stand-alone unit
All model numbers for this configuration
FIN-24-J-
Look for -J- for “Jumper”