Installing the system in the rack, Installing the system in the rack -15 – Dell PowerEdge 2600 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
F i g u r e 1 - 1 2 . I n s t a l l i n g t h e R a c k B e z e l
thumbscrew (2)
3
Reinstall the hard drives in their slots in the drive bay, if they were removed to lighten
the ehassis (see your Installation and Troubleshooting Guide for instruetions).
5
Install the power supplies and the mieroproeessor tray, if they were removed to lighten
the ehassis.
6
Close the bezel.
7
Replaee the system eover.
Installing the System in the Rack
/i\ CAUTION: If you are installing more than one system, install the first system in
the lowest available position in the rack.
/4\ CAUTION: Never pull more than one component out of the rack at a time.
1
Pull the two interior slide assemblies out of the raek until they loek in the fully-
extended position.
R a c k I n s t a l l a t i o n G u i d e
|
1-15