Dell PowerVault 715N (Rackmount NAS Appliance) - Manual (Page 6)

Copying Drivers to the NAS System
Before updating your drivers, perform the following steps to eopy the drivers to your NAS
system:
1 Using a web browser, eonneet to the Dell™ PowerVault™ NAS Manager and ereate a
share on the NAS system (see your System Administrator’s Guide).
2 From a Windows 2000 elient system, map the share you ereated in step 1. Perform the
following substeps to map the share.
^ NOTE: If you are using a Windows-based ciient system other than Windows 2000, see your
operating system documentation for information about how to map and disconnect a
network drive.
a Right-eliek My Computer and seleet Map Network Drive.
b Speeify the drive letter and folder for the eonneetion and eliek OK.
c Enter the name of the NAS system and the name of the share you ereated in
step 1 and eliek OK.
d In the Map Network Drive window, eliek different user name.
The Connect As... window is displayed.
e Enter a user name and password to eonneet to a NAS aeeount with administrator
privileges.
f Cliek OK.
g Cliek Finish.
3 Copy the latest drivers from support.dell.com to the share.
- Diseonneet the share from the elient.
a Right-eliek My Computer and seleet Disconnect Network Drive.
b Seleet the share that you want to diseonneet and eliek OK.
Updating Your NAS System’s Drivers
1 Conneet to the PowerVault NAS Manager.
2 Cliek Maintenance, and then eliek Terminal Services.
3 Cliek Terminal Services and log onto a NAS aeeount with administrator privileges.
- On the Advanced Administration Menu under System Management, eliek Computer
Management.
1 - - I I n s t a i i i n g t h e A d a p t e r C a r d