Cisco Aironet 2 dBi Diversity Omnidirectional Ceiling Mount Antenna AIR-ANT5959 User Manual
Page 5
5
Cisco Aironet 2 dBi Diversity Omnidirectional Ceiling Mount Antenna (AIR-ANT5959)
78-13213-03
Installation Instructions
c.
Install the second adapter the same way you installed the first.
d.
Make sure that the adapters are 5 in. (12.7 cm) apart and the elongated openings are on the same
side of the ceiling track as shown in the following illustration.
Step 6
Grasp the antenna with one hand and the track with the other while inserting the antenna’s mounting
clips into the ceiling mounting clip adapter until they can go no further as shown in the following
illustration.
Step 7
Route the antenna cables into the space above the ceiling grid and connect them to the device or
extender cables.
Step 8
Replace the ceiling tiles.
Note
You may have to trim some material from one of the tiles to accommodate the antenna cables.
5 inches
74525
74526