CDA SC610 - Manual (Page 31)

31
1
2
1
To remove the telescopic sliding shelf supports:
– Remove the side racks by unscrewing the fixing screws (Fig. 22).
– Lay down the telescopic sliding shelf support and side racks, with the telescopic sliding shelf support
underneath.
– Find the safety locks. These are the tabs that clip over the wire of the side rack (arrow 1 in Fig. 23).
– Pull the safety locks away from the wire to release the wire (arrow 2 in Fig. 23).
Cleaning the Sliding Shelf Supports
– Wipe the supports with a damp cloth and a mild detergent only.
– Do not wash in the dishwasher, immerse in soapy water, or use oven cleaner.
Fig. 22 Fig. 23