CDA SC610 - Manual (Page 37)

37
Replacing the Middle and Inner Panes of Glass
1. Make sure the door is locked open (see fig. 38).
2. Replace the middle pane:
– Check that the four rubber pads are in place (M in fig. 44).
– Check that you are holding the pane the correct way. You
should be able to read the wording on it as it faces you.
– Gently insert the top edge of the pane into the top clamps
(arrow 1 in fig. 45), then lower the pane and insert the
bottom edge into the bottom clamps (arrow 2 in fig. 45);
and then slide the pane into position (fig. 46).
M
1 2
1
Fig. 44
Fig. 45
Fig. 46
M