CDA SC610 - Manual (Page 38)

38
3. Replace the Inner Pane:
– Check that the four rubber pads are in place (D in fig. 47).
– Check that you are holding the pane the correct way. You should
be able to read the wording on it as it faces you.
– Insert the pane in the left E and right F slide guides (fig. 48), and
gently slide it to the retainers H (Fig. 49).
– Reassemble the seal G in the correct way (fig. 50) by hooking
the no. 3 fixing hooks in the proper holes (fig. 51).
4. Unlock the oven door by opening it completely and closing the
lever A on the left and right hinges (fig. 52).
D
G
E
F
H
A
It is normal the opened gap between
the top edge of the inner glass and the
sealed gasket. This allows the cooling air
circulation.
The oven door
has a sealed
gasket in the
top part.
Fig. 47
Fig. 48
Fig. 49
Fig. 51
Fig. 50
Fig. 52
H
D
E
F
A
G