Canon Vb-C50fi User Manual

Page 162

Advertising
background image

5-32

Message

Explanation

A023 Detection in change of point of contact (err)

a %1 detected at In%2

%1

point of contact device input change (front-edge | rear-edge | pulse | notch)

%2

Point of contact input terminal number (1 to 2)

A change was detected at point of contact device terminal In1 or In2.
front-edge denotes OFF

→ ON, rear-edge denotes ON → OFF, pulse

denotes OFF

→ ON → OFF, and notch denotes ON → OFF → ON. pulse

and notch are brief (10-20 milliseconds) ON and OFF periods detected
during OFF and ON states respectively.

Message

Explanation

Response

A022 Applet archive load failure (warning)

archive/%1 not found

Applet archive file does not exist or is corrupted.

Copy the missing (or damaged) file in the '/archive' applet from the CD-ROM
and reboot.

%1

Applet archive name (glimpse.cab | glimpse.zip | lvapplet.cab | lvapplet.zip |
imagemap.gif | digits.gif)

Log Messages

Message

Explanation

A015 WebView Administrator Viewer start (info)

%1@%2 privilege granted

The WebView Administrator Viewer has started operation.

%1

Type of clients (LS/C | LS/D)

%2

Client host IP address

Message

%3

A016 Amount of transmitted video data (info)

%1@%2 %3 frames / %4 bytes in %5 seconds

Number of frames

%1

Client type (LS/D | LS/H)

%2

Client host IP address

Explanation

This shows the results of video transmission for a video transmission client.

%4

Number of bytes

%5

Video transmission time

Advertising