Clarion RX755VD - Manual (Page 51)

English
Owner
’s
manual
VRX755VD
53
Selecting with a station number
1. Touch the [SRCH] key.
2. Touch the [0]~[9] key corresponding with the
station you desired. When you touch the
wrong number ([0]~[9] key), you can cancel
that to touch the [CLR] key.
3. Touch the [ENT] key. The radio channel you
required would be tuned.
4. Touch the [ESC] key.
Channel selection
Channels are selected with the following
buttons.
• The [ a ] or [ d ] button
• A [DIRECT] button
∗ For details, see the following operation descriptions.
Note:
• The audio output is muted and other button
operations are not accepted during channel
selection.
Tuning mode (T-MODE)
There are two channel selection modes: seek
mode and manual mode.
● Seek tuning
Only channels that can be received are selected
while channels without broadcasts and channels
not covered by the contract are automatically
skipped.
1. Press the [ a ] or [ d ] button.
The receiver seeks the next available
channel below or above the current channel.
∗ The same operation can be performed by
touching the screen to display the menu
screen, then touching the [
å ] or [ ∂ ] key.
2. Press and hold the [ a ] or [ d ] button.
The receiver moves to seek channels below
or above the current channel. If the channel
found when either button is released is
available, that channel is received.
Otherwise, seeking continues until an
available channel is found.
● Manual tuning
Any channel including channels without
broadcasts and channels not covered by the
contract can be selected during manual tuning.
1. Press and hold the [BAND] button or the
[BAND] key for 1 second or longer.
Selecting a band
Press the [BAND] button to select a band.
Each press of the button changes the display as
shown below.
SR1 ➜ SR2 ➜ SR3 ➜ SR1 …
● Information displayed during reception
The following information is displayed when
Sirius Radio cannot be received normally.
• UPDATING : when the receiver is turned on
the first time or after a reset
• ACQUIRING : when a channel is being tuned
in (no signal is yet received)
• INVALID CH : a channel without a broadcast
has been selected
• NO SIGN-UP : a channel not covered by your
contract
Switching displayed channel labels
● Panel closed
1. Press the [DISP] button to show the sub
display.
2. Hold down the [DISP] button for 1 second to
sequence the displayed channel labels as
shown below.
CH.NAME ➜ TITLE ➜ ARTIST ➜ RADIO
TEXT ➜ CH. NAME…
● Panel open
CH.NAME, CATEGORY TITLE, ARTIST and
RADIO TEXT are displayed.
Touch each keys, the selected labels scroll
once.
Displaying radio text
∗ Radio text is only displayed for stations that
transmit such information.
Touch the screen in the main screen to display
radio text.
SIRIUS Operation