Casio PX720C - Manual (Page 12)

E-10
Playing with Different Tones
1. Press the METRONOME button.
• This starts the metronome.
• The lamp above the SONG X/„ button flash in time
with the metronome beat.
2. To change the beat, hold down the TONE/
SETTING button as you press one of the
METRONOME BEAT keys to select a beat
setting.
• You can specify a beat value of 0, 2, 3, 4, or 6 as the
beat. Specifying 0 as the setting plays a straight click,
without any chime. This setting lets you practice with
a steady beat.
3. While holding down the TONE/SETTING
button, use the TEMPO keys to specify a
tempo value in the range of 20 to 255 beats
per minute.
• Each press of the + or – key raises or lowers the
tempo value by 1.
• You can use the value input keys (0 to 9) to enter a
specific value. Be sure to input all three digits.
Example: To enter “96”, press keys 0, 9, 6.
4. Press the METRONOME button or SONG
X/„ button to turn off the metronome.
NOTE
• To return the tempo setting to the default tempo of the
currently selected Music Library tune, press the + and –
keys at the same time in step 3. Pressing + and – while
recording will return the tempo value to 120.
To adjust the metronome volume
NOTE
• You can perform the following procedure at any time,
regardless of whether or not the metronome is sounding.
1. While holding down the TONE/SETTING
button, use the METRONOME VOLUME
keys to specify a volume value in the range of
0 to 42.
• For details about using the keyboard keys for
settings, see “Keyboard Keys Used for Configuring
Settings” on page E-19.
• Each press of the T orS key raises or lowers the
metronome volume value by 1.
NOTE
• To return to the initial default setting, press T and S at
the same time.
Using the Metronome
PX720_02_e.fm 10 ページ ２００７年６月１１日 月曜日 午前１１時６分