Casio PX720C - Manual (Page 18)

E-16
Recording and Play Back
1. Press the RECORDER button so its lamp is
lit.
2. Press the LR button until the lamp of only the
track to which you want to play back is lit.
3. Press the RECORDER button so its lamp is
flashing.
• This will cause the L lamp to flash.
4. Use the LR button to select the track to which
you want to record.
• Make sure that the indicator lamp for the record track
is flashing.
Example: To listen to playback of Track 1 as you record
to Track 2
5. Select the tone and effects (Track 1 only) you
want to use for your recording.
6. Press the SONG X/„ button or play
something on the keyboard.
• This will start both playback of the recorded track
and recording to the other track.
7. To stop recording, press the SONG X/„
button.
1. Press the RECORDER button so its lamp is
lit.
NOTE
• When a song has something recorded in both tracks, you
can turn off one track and play back just the other track,
if you want. Whether a track is on or off is indicated by
the lamps above the LR button. Each press of the LR
button cycles through the different possible track on/off
settings.
2. Press the SONG X/„ button.
• This starts playback of the song and/or track you
selected.
NOTE
• You can change the tempo setting as a track is playing.
• Press the SONG X/„ button again to stop playback.
To record to one track of a
song while listening to the
playback of the other track
Lit (Play) Flashing (Record Standby)
Playing Back from Digital
Piano Memory
PX720_e.book 16 ページ ２００７年６月６日 水曜日 午後３時６分