Concord Camera Eye-Q 4062AF - Manual (Page 13)

11
En
A
AWB
3 M 28/45 A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
AWB
5
10
30
2
A
AWB
A
AWB
3 M 28/45
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
AWB
5
10
30
2
TAKING A PICTURE
A
AWB
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
⁄ ⁄
A
AWB
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
⁄ ⁄
Steady
The subject is in
focus. Blinking
The camera is setting
the focus.
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
3 M
A
AWB
28/45
AWB
5
10
30
2
fig. 1.1
A
AWB
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
28/45
A
AWB
⁄ ⁄
fig. 1.2 fig. 1.3 fig. 1.4
A
AWB
28/45
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
⁄ ⁄
Auto-Focus Frame
USING AUTO-FOCUS LOCK
This feature can be used to freeze the focus when the subject is not located in the center of the picture.
About Auto-Focus LED
When the shutter button is pressed half-way, the auto-focus feature will be activated and the Auto Focus (green)
LED will display the status of the auto focus lock.
About Auto-Focus Frame
AF Frame Color Description
White No focus.
Green The subject(s) is in focus.
Using the focus lock:
1. Position the subject in the frame center. (fig.1.1)
2. Press the Shutter button halfway down until the AF frame turns green and the green AF LED stops blinking.
(fig.1.2)
3. Recompose your picture. (fig.1.3)
Keep the Shutter pressed half-way while recomposing the picture.
4. Press the Shutter button fully to capture the picture. (fig.1.4)
Note: The AF LED will continue blinking in the following conditions:
1. There are several subjects at different distances within the focus lock area. Recompose the picture by
moving the camera slightly.
2. There is no color contrast. Recompose the picture with a subject that contains more color.
3. There is insufficient lighting. Increase the lighting in the surrounding area.
4. Please refer to P.11 to change Auto Focus Mode and refer to P.24 to change AF assist light setting.
DC4062-5062 UG(514173-00)-E 11 5/31/04, 12:56:44 PM