Concord Camera Eye-Q 4062AF - Manual (Page 51)

49
En
INSTALLING THE DRIVER AND DIRECTX 9 – WINDOWS 98/98SE
NOTE: Do not connect the camera to your computer before the camera drivers and Microsoft DirectX 9
installation is completed.
Step 1 Make sure your camera is not connected to the computer.
Step 2 Make sure the computer is powered on and Windows 98 or 98SE is running.
Step 3 Close any other applications or software you may be running.
Step 4 Insert the supplied CD-ROM into your computer’s CD-ROM Drive.
NOTE: If the installer does not start automatically within 30 seconds after the CD-ROM has
been inserted, click on “My Computer” either on the Desktop or in the Start Menu and locate
the CD-ROM Drive. Double click on the CD-ROM Drive icon for installation and proceed to
Step 5.
Step 5 Select the language. Click [OK].
Step 6 The installation
screen will
appear. Click on
Install Camera
Drivers.
Step 7 Click [Next >].
Step 8 The next dialog will prompt you
to select the components that
will be installed. USB Mass
Storage Driver and DirectX 9
will be preselected.
The files will be saved in the
Concord Eye-Q 4062AF/
5062AF directory automatically.
OR
You may change the default folder by clicking [Browse…] and selecting a different folder in
your computer.
Click [Next >].
SOFTWARE INSTALLATION GUIDE
DC4062-5062 UG(514173-00)-E 49 5/31/04, 10:14:30 AM