Concord Camera Eye-Q 4062AF - Manual (Page 28)

26
En
EV COMPENSATION +
—
00 EV
— +
SET OK
+
—
AWB
SUNNY
FLUORESCENT
TUNGSTEN
RETURN SET
WHITE BALANCE
OK
AWB
WHITE BALANCE
PICTURE EFFECTS
EV COMPENSATION
METERING
VIDEO RESOLUTION
RETURN SELECT
VIDEO MODE
OFF
B&W
SOLARIZE
SEPIA
RETURN SET
PICTURE EFFECT
OK
320x240
160x120
RETURN SET
VIDEO RESOLUTION
OK
1
3
3
2
5
5
10
30
2
SPOT
MATRIX
RETURN SET
METERING
OK
TAKING VIDEO CLIP WITH SELF-TIMER
1. In the ( ) Video Clip Mode, press button, and the Self-Timer icon ( ) will appear on the LCD.
2. Place the camera on a flat surface or tripod.
3. Use the LCD to compose the picture, and then press the Shutter button to activate the Self-Timer.
The Self-Timer LED will blink slowly for 7 seconds, faster for the remaining 3 seconds and then starts
recording the video clip.
4. Press the Shutter button again to stop recording. Otherwise the camera will continue until the memory limit is
reached.
USING THE MAIN MENU IN VIDEO CLIP MODE
How to Use the Main Menu in Video Clip Mode:
1. Turn the camera on.
2. Set the mode switch to ( ) Video Clip Mode.
3. Press the MENU button to display the Main Menu.
4. Press or until the desired option is highlighted.
5. Press to enter the submenu.
6. Press or in the submenu to toggle between the options.
7. Press the OK button to make a selection.
• All selections will be marked by a red check mark.
8. To return to the previous menu, press .
9. To exit the menu at any time, press the MENU button.
X2 X1
28 SEC
1 SEC A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
A
AWB
28 SEC
Press Shutter to Record
TAKING VIDEO CLIPS
A
AWB
A
AWB
A
AWB
⁄ ⁄
A
AWB
⁄ ⁄
A
AWB
A
AWB
⁄ ⁄
DC4062-5062 UG(514173-00)-E 26 5/31/04, 10:06:57 AM