Using the camcorder abroad – Canon FS10 User Manual

Page 97

Advertising
background image

97

Condensation may form in the following cases:

• When the camcorder is moved

quickly from cold to warm places

• When the camcorder is left in a humid

room

• When a cold room is heated rapidly

• Do not expose the camcorder to

sudden or extreme changes in
temperature.

• Place the camcorder in an airtight

plastic bag and let it adjust to
temperature changes slowly before
removing it from the bag.

The camcorder automatically shuts off.
The precise time required for water
droplets to evaporate will vary
depending on the location and weather
conditions. As a general rule, wait for 2
hours before resuming use of the
camcorder.

Using the Camcorder Abroad

Power Sources

You can use the compact power
adapter to operate the camcorder and
to charge battery packs in any country
with power supply between 100 and
240 V AC, 50/60 Hz. Consult a Canon
Service Center for information on plug
adapters for overseas use.

Playback on a TV Screen

You can only play back your recordings
on TVs compatible with the NTSC
system. The NTSC system is used in
the following countries/areas:
American Samoa, Antigua, Aruba,
Bahamas, Barbados, Bermuda, Bolivia,
Canada, Chile, Colombia, Costa Rica,
Cuba, Ecuador, El Salvador, Greenland,
Guam, Guatemala, Haiti, Honduras,
Jamaica, Japan, Korea, Mexico,
Micronesia, Myanmar, Nicaragua,
Panama, Peru, Philippines, Puerto Rico,
Saint Kitts and Nevis, Saint Lucia, Saint
Vincent and the Grenadines, Surinam,
Taiwan, Trinidad and Tobago, USA,
Venezuela, Virgin Islands.

T

O

AVOID

CONDENSATION

W

HEN

CONDENSATION

IS

DETECTED

Advertising
This manual is related to the following products: