Date/time setup – Canon FS10 User Manual

Page 81

Advertising
background image

81

[QUICK START]: Select whether to activate the Quick Start function when you close the
LCD panel in a recording mode (

35) and the length of time after which the camcorder

will end the standby mode and shut off automatically.

[SPEAKER VOL.]: Adjust (

) the volume of the playback. You can also adjust the

volume using the joystick guide (

38).

[TV TYPE]: In order to display the picture in full and in the correct aspect ratio, select the
setting according to the type of television to which you will connect the camcorder.
[

NORMAL TV]: TV sets with 4:3 aspect ratio.

[

WIDE TV]: TV sets with 16:9 aspect ratio.

• When the TV type is set to [

NORMAL TV], the picture displayed on the LCD screen

will be smaller than the full display area.

[USB SETTING]: Select the connection protocol to use when connecting the camcorder to
an external device using the USB cable.
[

DVD BURNER]: To connect exclusively to the optional DW-100 DVD Burner.

[

PC/PRINTER]: To connect to a computer, a printer or similar USB peripherals.

[

CONNECT&SET]: To make the selection from a screen that appears at the time of the

connection to the external device.

[IMG NUMBERS]: Select the image numbering method to be used on a new memory card.
Images are automatically assigned consecutive image numbers from 0101 to 9900, and
stored in folders containing up to 100 images. Folders are numbered from 101 to 998.
[

RESET]: Image numbers will restart from 101-0101 every time you insert a new

memory card.
[

CONTINUOUS]: Image numbers will continue from the number following that of the

last image recorded with the camcorder.
• If the memory card you insert already contains an image with a larger number, a new

image will be assigned a number one higher than that of the last image on the memory
card.

• We recommend using the [

CONTINUOUS] setting.

[FIRMWARE]: You can verify the current version of the camcorder's firmware. This menu
option is usually unavailable.

Date/Time Setup

DATE/TIME SETUP

[DATE FORMAT]: Select the date format to be used for most on-screen displays, and (if
selected) for the date printed on photos.

Menu item

Setting options

[T.ZONE/DST]

List of world time zones.

z

z

z

z

28

[DATE/TIME]

z

z

z

z

27

[DATE FORMAT]

[Y.M.D (2008.1.1 AM 12:00)],
[M.D,Y (JAN. 1, 2008 12:00 AM)],
[D.M.Y (1.JAN.2008 12:00 AM)]

z

z

z

z

Advertising
This manual is related to the following products: