Canon FS10 - Manual (Page 87)

87
CANNOT PLAY BACK CHECK THE CARD
- There is a problem with the memory card.
/ CANNOT PLAY THE MOVIES IN THE BUILT-IN MEMORY INITIALIZE USING ONLY THE
CAMCORDER
- The camcorder's built-in memory was initialized using a computer. Initialize the built-in memory with this
camcorder ( 30).
CANNOT PLAY THE MOVIES ON THIS CARD
- Movies cannot be played back from a memory card with a capacity of 64 MB or less.
CANNOT PLAY THE MOVIES ON THIS CARD INITIALIZE USING ONLY THE CAMCORDER
- The memory card in the camcorder was initialized using a computer. Initialize the memory card with this
camcorder ( 30).
CANNOT RECORD
- There is a problem with the memory.
/ CANNOT RECORD CANNOT ACCESS THE BUILT-IN MEMORY
- There is a problem with the built-in memory.
CANNOT RECORD CHECK THE CARD
- There is a problem with the memory card.
/ CANNOT RECORD MOVIES IN THE BUILT-IN MEMORY INITIALIZE USING ONLY THE
CAMCORDER
- The camcorder's built-in memory was initialized using a computer. Initialize the built-in memory with this
camcorder ( 30).
CANNOT RECORD MOVIES ON THIS CARD
- Movies cannot be recorded on a memory card with a capacity of 64 MB or less.
CANNOT RECORD MOVIES ON THIS CARD INITIALIZE USING ONLY THE CAMCORDER
- The memory card in the camcorder was initialized using a computer. Initialize the memory card with this
camcorder ( 30).
CARD FULL
- The memory card is full. Erase some recordings to free some space or replace the memory card.
CARD REACHED THE MAXIMUM NUMBER OF SCENES
- The memory card already contains 999 scenes (the maximum number of scenes); no further scenes can be
copied onto the memory card. Delete some recordings ( 41, 58) to free some space.
CARD UNABLE TO RECOGNIZE THE DATA
- The memory card contains scenes recorded in a different television system (PAL or SECAM).
CHANGE THE BATTERY PACK
- Battery pack is exhausted. Replace or charge the battery pack ( 19).