Canon FS10 - Manual (Page 57)

57
2
Push the joystick ( ) toward .
3
Select ( ) [ JUMP 10
IMAGES] or [ JUMP 100
IMAGES].
4
Jump ( ) the number of images
selected and press .
You can press again to hide the
joystick guide.
IMPORTANT
• Observe the following precautions while
the ACCESS indicator is on or flashing.
Failing to do so may result in permanent
data loss.
- Do not open the memory card slot
cover.
- Do not disconnect the power source
or turn off the camcorder.
- Do not change the position of the
mode dial.
• The following may not be displayed
correctly.
- Images not recorded with this
camcorder.
- Images edited on or uploaded from a
computer.
- Images whose file names have been
changed.
Slideshow
You can play a slideshow of all the still
images.
1
Select ( , ) the first still
image of the slideshow.
2
Press to play back the still
images one after another.
Press to stop the slideshow.
Index Screen
1
Move the zoom lever toward W.
The still images index screen appears.
2
Select ( , ) an image.
• Move the orange selection frame
to the image you want to view.
• Repeatedly press or to
extend the selection frame and
browse through whole index
pages.
3 Press .
The index screen closes and the
selected image is displayed.
You can switch between the still images
recorded in the built-in memory and
those recorded on the memory card.
1 In the index screen, move (
) the
orange selection frame to the tabs
on the top of the screen.
2 Select ( ) the location of the still
images you want to play back.
3 Return ( ) to the index screen to
select the still image.
Still images in the built-in
memory
Still images on the memory card
/
/ T O SELECT WHICH STILL
IMAGES TO PLAY BACK