Canon IXUS 1000 HS - Manual (Page 101)

101
You can choose between four movie quality settings.
Choose the movie quality setting.
● After pressing the m button, press the
op buttons or turn the  dial to choose
, then press the m button again.
Choose an option.
● Press the op buttons or turn the  dial to
choose an option, then press the m button.
 The option you set will appear on the screen.
Movie Quality Table
Estimated Shooting Time
Changing the Movie Quality
Movie Quality
(Recording Pixels/Frame Rate)
Content
1920 x 1080 pixels, 24 frames/sec. For shooting full high-definition movies.
1280 x 720 pixels, 30 frames/sec. For shooting high-definition movies.
640 x 480 pixels, 30 frames/sec. For shooting standard quality movies.
320 x 240 pixels, 30 frames/sec.
Since the number of recording pixels is smaller than
in
, the movie quality will appear coarse, but you
can record approximately three times the length.
Movie Quality
Shooting Time
4 GB 16 GB
14 min. 34 sec. 59 min. 40 sec.
20 min. 43 sec. 1 hr. 24 min. 54 sec.
43 min. 43 sec. 2 hrs. 59 min. 3 sec.
1 hr. 58 min. 19 sec. 8 hrs. 4 min. 30 sec.
• Based on Canon’s testing standards.
• Recording will automatically stop when the clip file size reaches 4 GB, or when the
recording time reaches approximately 10 minutes when shooting in
or , and
approximately 1 hour when shooting in or .
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 6 or higher memory cards are recommended.