Canon IXUS 1000 HS - Manual (Page 110)

Viewing Slideshows
110
You can automatically play back images recorded to a memory card. Each
image displays for approximately 3 seconds.
Choose ..
● After pressing the m button, press the
op buttons or turn the  dial to choose
., then press the m button again.
Choose a transition effect.
● Press the op buttons or turn the  dial
to choose an effect, then press the m
button.
 The slideshow will start a few seconds after
[Loading image...] appears.
● In filtered playback (p. 109) , only images
matching a filter play back.
● You can pause/restart a slideshow by
pressing the
m button again.
● Press the n button to stop the
slideshow.
Filtered playback
In filtered playback (Step 3), you can view filtered images with “Quickly Searching
Images”
(p. 108) , “Viewing Slideshows” (p. 110) , and “Magnifying Images”
(p. 113) . You can process all filtered images at once while performing operations
in “Protecting Images” (p. 117) , “Erasing Images” (p. 120) , or “Printing from the
Print List (DPOF)” (p. 137) , by choosing all of the filtered images.
However, if you change the category (p. 123) , or edit an image and save it as a
new image (p. 127) , a message will appear, and filtered playback will cancel.
Viewing Slideshows
• If you press the qr buttons or turn the  dial during playback, the
image will switch. If you keep the qr buttons pressed, you can fast-
forward through images.
• The power saving function (p. 51) does not work during slideshows.