Canon FAX-TT250 - Manual (Page 15)

15
1
SE
TTIN
G
UP
3 Use [ ] or [ ] to select <PBX>, then press [Start/Copy].
4 Use [ ] or [ ] to select the access line type for the switching system, then press [Start/Copy].
You can select <PREFIX> or <HOOKING>. If you selected <HOOKING>, proceed to step 6.
5 If you chose <PREFIX> in step 4:
Enter the outside line access number (up to 19 digits) using the numeric buttons and then press [Redial/
Pause], then press [Start/Copy].
6 Press [Stop].
Registration ends and the fax returns to standby mode.
HOOKING
Thalia.book Page 15 Tuesday, September 28, 2004 10:13 AM