Replacing the ink film – Canon FAX-TT250 User Manual
Page 48
Advertising
48
Replacing the ink film
Replace the ink film when a printout is blank or <SET INK FILM> appears in the LCD display.
5
Follow steps 4 to 5 in Installing the ink film on p. 9, and close the operation panel.
6
Plug in the power cord.
7
<DATE & TIME> appears in the LCD display.
Follow the steps in Setting the date and time on p. 8.
• Do not wipe the recording head with a moistened cloth.
• Be sure to use a soft cloth to avoid scratching the scanning area. If the part has scratches, lines will be printed on the
document surface.
1
Lift the operation panel gently until it locks into
position.
2
Remove the used ink film cartridge and holders.
Open lever
Thalia.book Page 48 Tuesday, September 28, 2004 10:13 AM
Advertising