Canon FAX-TT250 - Manual (Page 18)

18
Guidelines for entering numbers, letters,
and symbols
■ Entering letters and numbers
■ Entering symbols
Correcting mistakes
You can clear an entire entry by pressing [Clear]. Alternatively, follow the procedure below to correct individual
letters:
After 60 seconds of no operation panel input, the fax returns to standby mode and any unregistered changes are lost.
1 Press to switch mode.
2 Press the numeric button that contains the letter you want.
Press repeatedly until the letter you want appears.
3 Continue entering other letters using the numeric buttons.
• If the next letter you want to enter is under the same numeric button you pressed in step 2, press [ ] to move the cursor to the
right. Then press that same numeric button repeatedly until the letter you want appears.
• To enter a space, press [Space].
1 Press [#] repeatedly until the symbol you want appears.
2 If you want to enter another symbol, press [ ] to move the cursor to the right, then press [#] repeatedly until
the symbol you want appears.
1 Use [ ] or [ ] to move the cursor under the incorrect letter.
2 Use the numeric buttons to enter the correct letter over the incorrect letter.
3 When you have finished making corrections, press [Start/Copy] to register your new entry.
_ :A
C :A
# :1
CANEN :A
CANON :A
Thalia.book Page 18 Tuesday, September 28, 2004 10:13 AM