Canon 970 IS - Manual (Page 22)

Printing 20
Getting
Started
Printing
1.
Connect the camera to a direct print compatible printer.
• Slip your fingernail or the toggle on the wrist strap under the left
edge of the terminal cover to open it and insert the interface
cable all the way into the connector.
• See the printer’s user guide for connection instructions.
• Since this camera uses a standard protocol (PictBridge), you can
use it with other PictBridge-compliant printers in addition to
Canon-brand printers.
For detail, see the Direct Print User Guide.
2.
Turn on the printer.
3.
Press the camera’s button to turn on the power.
• The button will light blue.
4.
Use the or button to select an image to print and
press the
button.
• The button will blink blue and printing will start.
• You can also select images by using the control dial.
• After you finish printing, turn off the camera and the printer and
disconnect the interface cable.
Terminal Cover
A/V OUT and DIGITAL Terminal
Button Button
Control Dial
Buttons