Power and audio controls, Voiume adjustment, Source] turn the power on – Panasonic CQRDP162N User Manual
Page 6: Hold down over 2 sec.): toggle loudness on and off, Sound quality adjustment, V.;.,..;. select a s, Vol] : adjust the level
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Power and Audio Controls
Voiume adjustment
/\ : Up
V : Down
• Hold down: fast forward
Power on
Start the engine first!
... ySOURCE^'.
[SOURCE]
Turn the
power on.
»[SOURCE] (Hold down) :
Turn the power off.
1
[MUTE] Toggle the
Mute on and off.
• Mute the sound.
(Hold down over 2 sec.):
Toggle Loudness on and
off.
® Enhance bass and treble
tones at low volume.
Sound quality adjustment
( Notes )
® Power on
»The volume increases gradually
to the last level if that level was
over 20.
»When first powered up, a mes
sage is displayed
® [DISP]: Stop the message.
® [SOURCE](Hold down at power
off) :Turn on the power and dis
play the message.
[SEL] :
I Regular Mode |
v.;.,..;. Select a
s-''
ffl Volume
1
!;J ;■:■■■(
SEL
( Note )
® No operation for 5 sec.
Return to the regular
mode.
® If the fader is set to
front, the pre-amp out
put (rear) is decreased.
;■■■ ■ [VOL] : Adjust the level.
: Up
V : Down
(-12 to 4-12 in 3 dB step)
(-12 to 4-12 in 3 dB step)
(left/right : 1 to 15)
(front/rear : 1 to 15)