Bradford White EFR-1-60T1206SX - Manual (Page 43)

43
To Increase Setpoint Temperature
Step 1: Depress and hold “Temperature Up” button until desired setpoint temperature appears in the display.
Step 2: “Setpoint” indicator begins flashing in the display after pressing “Temperature Up” button.
Step 3: Press “SET” button for new setting to take effect immediately. “Setpoint” will stop flashing. If the “SET” button is
not pressed, the new temperature setting will take effect in approximately 10 seconds.
SELECT SET
Status
°F
idle
setpoint
Operational

Step 3
"Setpoint" flashes
for 10 seconds
Press SET Button for setting
to take effect immediately
SELECT SET
Status
°F
idle
Operational

Step 1
SELECT SET
Status
°F
idle
setpoint
Operational

Step 2
"Setpoint"
flashes