Canon Speedlite 430EX II - Manual (Page 16)

15
FE (flash exposure) lock locks the correct flash exposure setting for any
part of the scene.
With <a> displayed on the LCD panel, you press the camera’s
<7> button. If the camera does not have the <7> button, press
the <P> button.
1 Focus the subject.
2
Press the <7> button. (3)
Aim the subject at the center of the
viewfinder and press the <7>
button.
X The Speedlite fires a preflash, then
the required flash output is retained in
memory.
X “FEL” will be displayed in the
viewfinder for 0.5 sec.
Each time you press the <7>
button, a preflash will be fired and a
new flash exposure reading will be
locked.
7 : FE Lock
If the subject is too far away and underexposure will result, the <Q> icon
will blink in the viewfinder. Move closer to the subject and try the FE lock
again.
If <a> is not displayed on the LCD panel, FE lock cannot be set.
If the target subject is too small in the viewfinder, the FE lock might not
be very effective.
A81_02.fm Page 15 Thursday, February 14, 2008 11:36 AM
COP
Y