Canon Speedlite 430EX II - Manual (Page 32)

31
For example, if you have the slave ID set
to <1> for three slave units, all three
slave units will be controlled as if they
were one Speedlite in slave group A.
About Slave Group Control
ID = A ID = A ID = A
Slave group A
Manual flash can be set manually with the slave unit. Do this in the
following cases:
(1) When you want to set the flash output with the slave units
individually for wireless or manual flash, as with studio flash units.
(2) When you use Speedlite Transmitter ST-E2 for wireless or manual
flash.
Hold down the <D> button for 2
sec. or more.
X <q> will blink.
Set the manual flash output. (p.19)
Setting Manual Flash with the Slave Unit
A81_03.fm Page 31 Tuesday, February 5, 2008 2:33 PM
COP
Y