Canon SCANFRONT 300P - Manual (Page 179)

10-8
Chapter 10 Troubleshooting
Not enough memory to execute scanner settings
ScanFront uses internal memory to scan documents. This memory usage differs according to conditions such as document size and
resolution. When setting scanning conditions that require a large amount of memory capacity, an error message saying “Not enough
memory to execute current scanner settings” may appear and you may not be able to scan the document.
The following table details scanning conditions that may cause ScanFront to run out of memory. If scanning cannot be executed
due to insufficient memory, refer to this table to reset scanning conditions.
Mode Resolution Scanning Side Prescan
Bleed-through
reduction
Page Size
Auto color detection
600dpi
Duplex
(Cannot be set) —
All page sizes
Simplex
400dpi Duplex A4, legal
Color
600dpi
Duplex
OFF
—
Legal
ON
All page sizes
Simplex B5, A4, legal
400dpi Duplex A4, legal
Gray
600dpi
Duplex
OFF
ON
Legal
ON
All page sizes
Simplex B5, A4, legal
400dpi Duplex A4, legal
Black and White
Error Diffusion
Text enhance
600dpi
Duplex
OFF Legal
ON
All page sizes
Simplex B5, A4, legal
400dpi Duplex A4, legal