Industrial Injection 6.7L Dodge Cummins Compound Turbo - Manual (Page 8)

13. INSTALL NEW HOT PIPE USING THE STOCK CLAMP AND NEW EXHAUST GASKET
NOTE: INSTALL THE FRONT BOLTS IN FRONT OF SHOCK SUPPORT FIRST, THEN INSTALL
THE OTHER BOLTS, LEAVE HOTPIPE CLAMP LOOSE FOR ADJUSTMENTS.
14. INSTALL TOP TURBO TOP SUPPORT BRACKET AND ADJUST AS NEEDED. USE THE
STUD AND NUT TO BOLT THE L BRAKCET TO, BUT FLIP THE L BRACKET FACING THE
CYLINDER HEAD. AFTER TOP BRACKET IS SECURE TIGHTEN EXHAUST HOUSING
CLAMP ON TOP CHARGER. AND TIGHTEN HOT PIPE CLAMP.
7.