Magnum Dynalab MD-109 - Manual (Page 11)

LAYOUT
REAR PANEL
INPUTS: All inputs are electrically isolated from the chassis to insure that the
ground plane is not compromised.
The MD 109 is equipped with two module windows, these windows will be
replaced if a DAC or an alternative source is added to the MD 109. When
another source is added to the unit the software will sense this new device and
setup the touch screen accordingly. This new input will be recognized when the
left hand knob is set to the input description i.e.: D1, D2, satellite radio or HD
radio or whatever future digital sources are connected.
OUTPUTS: The MD 109 uses high grade Neutrix, XLR connectors for balanced
output in a fully balanced system. Unbalanced output is handled using precision
manufactured WBT RCA connectors.
POWER INPUT: Plug in the AC cord, insuring that the voltage marked on the rear
of the unit is the same as the source AC. This receptacle also holds the external
fuse as well as the on/off switch.
ANTENNA INPUT: Hook up the antenna lead to this connection.
- 11 -