Magnum Dynalab MD-109 - Manual (Page 17)

SPECIFICATIONS
Usable sensitivity- Mono –
0.7 u V 9.0 dBf
50 dB quieting – Mono – 2.0 u V 9.9 dBf
50 dB quieting – Stereo – 2.3 u V 20.0 dBf
Capture ratio – 1.5 dB
Image rejection – 125.0 dB
Signal to noise ratio – 80.0 dB
Alternate channel – Wide – 46.0 dB
Alternate channel – Narrow - 70.0 dB
Alternate channel – Attenuation
~ super narrow –
80.0 dB
Adjacent channel – Wide – 3.0 dB
Adjacent channel – Narrow - 21.0 dB
Adjacent channel – Super Narrow – 48.0 dB
THD – Mono – 0.10 %
THD – Stereo – 0.10 %
Stereo separation – 50.0 dB
AM suppression – 70.0 dB
SCA rejection – 80.0 dB
IF rejection – 80.0 dB
19 KHz and 38 KHz component rejection – 75.0 dB
Audio frequency response 2 Hz to 200 Khz( +0,-0.1 dB)
Balanced audio output (600 ohms) – 2.0 V
Line audio output (RCA) – 1.0 V
Output Impedance 200 ohms ( 2Hz-200KHz)
Signal to noise ratio >110 dB
Fuse replacement 115 volts 1 amp
Fuse replacement 230/240 volts .5 amp
Tube replacement ( position 1 & 2)
6922 MD Cryovalve Refrence
Tube replacement ( position 3 & 4) 6922 MD Reference
Line power (Must be specified)
– 110/220/230/240 -
VAC
Dimensions (inches H.W.D.) – 6 x 19 x 16
Dimensions (cm H.W.D.) – 15.24 x 48.3 x 40.7
Weight (lbs./kgs) - 40/17.1
Power consumption (Typ/Max) – 50w/100w
MAGNUM DYNALAB LTD. RESERVES THE RIGHT TO CHANGE OR MODIFY THE
SPECIFICATIONS WITHOUT FURTHER NOTICE.
- 17 -