Metalfab Martin Motomagnetic Electric Vibrator - Manual (Page 6)

Martin Engineering M3286-8/01 2 MOTOMAGNETIC ® Electric Vibrators
Materials required In addition to metric hand tools, the following materials are required to install
this equipment:
• Rigid beam or mounting plate.
• BBAC Cable Kit, P/N 32271, or equivalent.
(Mount Kit for Electric Vibrators, P/N 32401-XX includes W-Beam Mount,
mounting hardware, and BBAC Safety Cable Kit.)
Storage Store vibrator in an ambient temperature not less than 41°F (5°C) with a
relative humidity not more than 60%. If the vibrator has been stored for 2 or
more years, remove bearings, wash them, and repack them with new grease
(see “Lubricating vibrator”).
Introduction