Danger – Nexen H-1000 810080 User Manual
Page 2
2
FORM NO. L-20143-J-1209
Copyright 2009 Nexen Group, Inc.
Nexen Group, Inc
.
560 Oak Grove Parkway
Vadnais Heights, Minnesota 55127
ISO 9001 Certified
This document is the original, non-translated, version.
Conformity Declaration: In accordance with Appendix II B of CE Machinery Directive (2006/42/EC):
A Declaration of Incorporation of Partly Completed Machinery evaluation for the applicable EU directives was
carried out for this product in accordance with the Machinery Directive. The declaration of incorporation is set
out in writing in a separate document and can be requested if required.
This machinery is incomplete and must not be put into service until the machinery into which it is to be
incorporated has been declared in conformity with the applicable provisions of the Directive.
Read this manual carefully before installation and operation.
Follow Nexen’s instructions and integrate this unit into your
system with care. This unit should be installed, operated and
maintained by qualified personnel ONLY. Improper installation
can damage your system, cause injury or death. Comply with
all applicable codes.
DANGER
In accordance with Nexen’s established policy of constant product improvement, the specifications contained in this manual
are subject to change without notice. Technical data listed in this manual are based on the latest information available at
the time of printing and are also subject to change without notice.
Technical Support: 800-843-7445
(651) 484-5900
www.nexengroup.com
- M-800 807682 M-800 807680 L-600 805280 F-450 802880 M-800 950256 H-1000 950357 H-1000 950350 H-1000 950355 H-1000 950354 H-1000 950353 H-1000 950361 H-1000 810052 H-1000 810068 H-1000 810042 H-1000 810032 H-1000 810050 H-1000 810055 H-1000 810040 M-800 950250 M-800 950258 M-800 950253 M-800 950254 M-800 950261 M-800 950257 M-800 950255 M-800 807650 M-800 807668 M-800 807655 M-800 807620 M-800 807610 M-800 807640 M-800 807630 M-800 807651 M-800 807663 M-800 807621 M-800 807611 M-800 807641 M-800 807631 M-800 807643 M-800 807652 M-800 807661 M-800 807622 M-800 807612 M-800 807642 M-800 807632 F-450 950051 L-600 950155 M-800 950252 L-600 950154 L-600 950151 L-600 950150 L-600 950162 L-600 950163 L-600 950156 H-1000 950351 F-450 950055 L-600 950158 L-600 950159 L-600 805272 L-600 805262 L-600 805252 L-600 805242 L-600 805232 L-600 805222 L-600 805212 L-600 805292 L-600 805270 L-600 805275 L-600 805260 L-600 805250 L-600 805240 L-600 805230 L-600 805220 L-600 805210 F-450 950052 F-450 950050 F-450 950063 F-450 950062 F-450 950061 F-450 802852 F-450 802842 F-450 802832 F-450 802822 F-450 802812 F-450 802850