Copy success – NextoDI NVS1501 User Manual

Page 13

Advertising
background image

19

DATA BACKUP(COPY) AND VERIFY

DATA BACKUP(COPY) AND VERIFY

20

3.6 GB

16 Files

Same Copy is in

20090618.000

Verify CF?

102.3 GB

Cancel

Select

Verify

Delete

Copy

CF

3.6 GB

16 Files

102.3 GB

Copy

Delete

Verify

Same Copy is in

20090618.000

New Copy CF?

Cancel

Select

CF

102.3 GB

Delete

Verify

Copy

Cancel

Select

3.6 GB

16 Files

Same Copy is in

20090618.000

Delete CF?

CF

3. Verify

3.6 GB

16 Files

Same Copy is in

20090618.000

Verify CF?

102.3 GB

Cancel

Select

Sample

Full

CF

When you choose the verify function, the NVS1501

compares the data stored on the hard drive to that

on the memory card. The verification logic entails

a full bit-by-bit verification, and detects any

differences.
: For verification, press the control key briefly
: Another option: press the control key for more

than 2 seconds. Select to make one more copy

of this memory card.

Two options are available for verification using left/right key selection.

Sample verify

Full verify

Compare first 1MByte of each file.

All the data is compared

Compare data stored in the hard drive to the data stored in the memory

card.

Verify

Copy again. Make a new folder and copy all of the data in the memory

card to the hard drive.

Copy

Delete the data on the memory card so that it can be reused.

Delete

Make new folder and copy all the memory card data into the folder.

Before copying data, the NVS1501 verifies that its hard drive area is

safe. If a bad sector is detected, a new, safe area is found –

then copying [Fast Copy] will begin.

Fast Copy

Verify&Copy

Same as [Fast Copy] but after copying, the data on the memory card

is compared with the copied data in the NVS1501 hard drive. Each

bit is verified.

Safe Copy

(2) Memory card with copied data
If the memory card was copied before and not modified since, then you can

choose to [Verify] or [Copy] or [Delete].

Three options are available for copy using up/down key selection.

4. Status

Current operation status is shown

on the LCD display.

(1) Total number of files in the memory

card versus the number of copied files.

(2) Amount of data copied.

(3) Elapsed time

5. Indication of Results

If the operation completes successfully,

the user is notified with a beep sound

and the lapsed time is displayed.

(1) Total number of files in the memory

card versus the number of copied files.

(2) Amount of data copied.

(3) Copy speed in (MB/s)

Reference

● Remove the memory card to return to the initial display.

● If you don't remove the memory card, the NVS1501 will automatically turn off

within 50 seconds to preserve battery life.

Copying

4/16 1.1 GB

102.3 GB

Cancel

0m30s

CF

Copy Done

Remove CF

16/16 3.6 GB

98.7 GB

Off

10.7 MB/s

Copy Success

1

3

1

3

102.3 GB

Device Read Error

ErrorNo: 0x33006000

CF

Error

91.4 Gb

Previous

Copy Failed

20090618.003

16 Files

3.6 GB

Ok

6. Error Display

The NVS1501 displays the previous operational status at the next power up. The

user will then know whether the last backup was successful.

2

2

Advertising