NextoDI NVS1501 - Manual (Page 17)

VIDEO/PHOTO PREVIEW
28 27
VIDEO/PHOTO PREVIEW
Use the Control key (up or down motion) to
confirm that you wish to delete the contents of
the memory card.
The contents of the memory card have been
deleted.
The copy operation is initiated automatically.
Current operation status is shown on
the LCD display.
(1) Total number of files in the memory card
versus the number of copied files.
(2) Size of files to be copied
(3) Elapsed time
If the operation completes successfully,
the NVS1501 will make a beeping sound and the
display will show:
(1) Total number of files in the memory card
versus the number of copied files.
(2) Size of files to be copied
(3) Copy speed (in MB/s)
20090629.000
OK Back
16 Files
20.1 Gb
4 Video Files
Are You Sure ?
20090629.000
OK
16 Files
20.1 Gb
4 Video Files
Deleted
Copying
4/16 3.6 Gb
102.3 Gb
Cancel 0m30s
CF
1 2
3
Copy Done
Remove CF
16/16 20.1 Gb
102.3 Gb
Off 50.7Mb/s
CF
1 2
3
4.3. If the capacity of the memory card is smaller than the backup
folder
102.3 Gb
NOT enough space
in CF
Remove CF
CF
Off
The NVS1501 does not support “Copy to
External Device” if the capacity of an
inserted memory card is less than
the size of a selected backup folder.
5. Preview from an external device
Select a Source
Internal HDD
External Device
149.0 GB
Select Back
Preview
148.0 GB
Cancel
External Device
(CF/SDHC/SDXC/USB)
Insert an
Preview
Select Back
2 Files / 257.2 MB
Show Video... 1
Show Image... 0
102.3 GB
Off
Remove USB
Preview
20090421.000
1/2
Select Back
20090417.002
The NVS1501 supports the preview of video files
stored on an USB external hard drive—as well as
video files stored on memory cards such as: SDHC,
SDXC, MS, MD and CF.
Select “External device” from the preview menu.
Then connect the external device to the NVS1501.
(1) If a memory card contains video or image
files—and is inserted into the NVS1501--
information about the video or image files will be
displayed.
(2) If an USB hard drive is connected, the
NVS1501 will detect and analyze the backup
folders. The NVS1501 will then display the backup
folders as in the figure. The rest of operations are
the same as previewing from the internal hard
drive
If you select “Back” by pressing and holding the
control key, then a “remove (device type)”
message will appear on the LCD display. Once the
cable or memory card has been removed, you will
automatically be returned to the main menu.