NextoDI NVS1501 - Manual (Page 29)

51
EXAMPLES OF BASIC FUNCTIONS EXAMPLES OF BASIC FUNCTIONS
52
(5) If the copy is successfully completed, the result
will be shown on the LCD. Remove the CF card
to return to the initial “XCopy ready”mode.
Copy Done
Remove CF
16/16 3.6 GB
98.7 GB
Off 10.7 MB/s
Copy Success
3. Copying a SDHC/SDXC/MS card
The Memory card slot for a SDHC/SDXC/MS card
is located on the top of the NVS1501. Insert the
SDHC/SDXC/MS card into the slot.
The remaining procedure is the same as for
CF memory cards.
SDHC/SDXC/MS Card
145.0 GB
XCopy Ready
Menu Off
1. Copying from an CF card
19. Examples of Basic Functions
102.3 GB
Cancel
Detected CF
Checking...
Copying
4/16 20.1 GB
102.3 GB
Cancel 0m30s
CF
3.6 GB
16 Files
Copy CF?
Fase Copy
Copy & Verify
Safe Copy
105.9 GB
Cancel Ok
CF
(1) Turn on the NVS1501 by pressing the power
button for more than 2 seconds. Wait for the
“XCopy ready ”mode, then insert an CF card
into the CF/MD slot located on the top of
the device.
(2) The NVS1501 detects the memory card and
analyzes it.
(3) The result of the backup analysis is shown
on the LCD. The total number of files--
in addition to the data capacity of the CF
card -- is shown on the LCD. The NVS1501
will wait for the completion of the backup
analysis before starting to copy.
(4) The copy status is shown on the LCD.
CF/MD Card
145.0 GB
XCopy Ready
Menu Off