NextoDI ND2730 - Manual (Page 15)

ADVANCED FUNCTIONS
24 23
PHOTO PREVIEW
3. Preview from an external device
Sel Back
245.0 G
Preview
Select a Source
Internal HDD
External DEV
Off
Preview
Cancelled
Remove CF
245.0 G
Sel Back
13 Files
14.1 GB
Show Photo
245.0 G
Cancel
245.0 G
Preview
Insert a
External DEV
(CF/SD/MS)
Select “External DEV” from the [Preview] menu.
Then connect the external device to the ND2730.
If a CF, SD, SDXC or SDHC memory card contains photo
files—and is inserted into the ND2730--information about
the photo files will be displayed.
If you select “Back” by pressing and holding the control
key, then a “remove (device type)” message will appear
on the LCD display. Once the cable or memory card has
been removed, you will automatically be returned to the
main menu.
The ND2730 supports the preview of photo files stored on an external device—
as well as photo files stored on memory cards such as: CF, SD, SDXC and SDHC.
14. Advanced Functions
ND2730 has several advanced function menus, accessible from the Main Menu.
Menu Operation
Self Test
Auto Copy
TMP Folder
Buzzer
FW Update
Built-in test utility for detecting physical errors on the
internal hard drive.
This function does not fix errors.
If an error is detected during the self-test, consult
your authorized NEXTODI dealer.
On/Off setting for auto copy option. Factory setting is
Off.
If this function is activated, “Copy” of a memory card
will be automatically initiated when you insert the
memory card into one of the built-in slots.
If the copy function fails, a TMP folder will be
generated. A user can delete the TMP folder using
this menu.
On/Off setting for buzzer sound. Factory setting is On.
Upgrade to new firmware with the firmware file
stored in the internal hard drive or on a memory card.
XCopy Ready
245.0 G
Menu Off
Press the control key briefly in order to get to
the main menu.
Enter Main Menu