NextoDI ND2730 User Manual

Page 17

Advertising
background image

27

ADVANCED FUNCTIONS

ADVANCED FUNCTIONS

28

(2) HDD Full Test

30m 56s

Off

245.0 G

HDD Full Test

0 Bad Found

Test Cancelled

30m 27s

Cancel

245.0 G

0 Bad Found

OK

Back

245.0 G

HDD Full Test

It will take

several hours.

Are you Ready?

Connet Power!

Sel

Back

245.0 G

Self Test

Select a Method

HDD SmartTest

HDD FullTest

Select “HDD Full Test” from the [Self Test] menu.

The HDD Full Test will take several hours. So you need

to connect power to the ND2730. It will read all the

sectors in the internal hard drive to discover if any bad

sectors exist.

The HDD Full Test in progress. This process will take

about 2~3 hours.

The user can cancel the HDD Full Test by pressing the

control key for more than 2 seconds.

99m 03s

Cancel

245.0 GB

12 Bad Found

HDD Change

Recommend

99m 03s

Cancel

245.0 G

0 Bad Found

Full Test OK.

No errors found.

Error found during the HDD Full Test. Further use of

ND2730 may result in the loss of backup data.

Consult your authorized NEXTODI dealer for service.

Caution

● The ND2730 indicates the completion of the test using the buzzer

sound. The power does not turn off automatically at the completion

of the test.

● The ND2730 returns to the initial mode only after the user pushes

the control key for more than 2 seconds.

● It is strongly recommended that the AC adapter be connected for

this test in order to prevent battery failure during the process.

Advertising