Cabletron Systems ESXMIM - Manual (Page 65)

ESXMIM/ESXMIM-F2 Local Management Guide Page 12-1
CHAPTER 12
THE MIB NAVIGATOR SCREEN
This chapter explains how to use the MIB Navigator utility. The MIB
Navigator allows access to a command set from which you can configure
and manage the ESXMIM. Figure 12-1 shows the MIB Navigator screen.
Figure 12-1 The MIB Navigator Screen
NOTE
Figure 12-1 shows the MIB Navigator screen that would be
presented after the user entered the ‘help’ command.
Commands Available to the User:
MIBNav-> help
SPECIAL:
arp
ctron
done
help
netstat
pwd
show
snmpset
traceroute
branch
defroute
exit
ls
next
quit
snmpbranch
snmptree
tree
cd
dir
get
mib2
ping
set
snmpget
su
whoami
done, quit, or exit - Exit from the MIB Navigator.
mib2 - Change MIB directory to MIB II (1.3.6.1.2.1).
ctron - Change MIB directory to cabletron (1.3.6.1.4.1.52).
For help with a specific command, type 'help <command>'.
MIBNav->
16
Event Message Line
Welcome to Cabletron ESXMIM Revision XX.XX.XX