PDR Mounts pstm3039 - Manual (Page 5)

MOUNTING THE ARMS TO THE DISPLAY
NOTE: Do not over tighten the bracket mounting screws as damage to the display internal mounting threads could occur.
Fig 1
Fig 2
Mounting hardware D,E,F,H,I,J
Square Multi-mount washer ( G )
Panel display TOP edge
Display bracket ( A )
Optional plastic spacers ( K )
1: Place the display panel face down on a protected surface.
2: Position the bracket (A) with the hooks facing towards the top See Fig 1 & Fig 2
3: Attach the bracket using the mounting holes that will place the top of the bracket closest to the top of the display,
using the proper screws and the square multi-mount washers supplied (D,E,F,H,I,and J)
4:NOTE : In some applications the plastic spacer (K ) and longer screws ( D.E.F )may be required to add clearance for the
back panel to allow enough tilt to locate on the wall mount bracket ( B )
Do not over tighten hardware, damage to the display may result.
place bracket (A) closest
to the top of the display
Viewing Centerline
(centerline of display)
Measure this offset distance
VIEWING HEIGHT AND OFFSET
5