Petsafe 250 m Remote Trainer - Manual (Page 6)

6 www.petsafe.net
Operating Guide
Prepare the Remote Transmitter
Charge the Remote Transmitter
1. Lift the rubber cover protecting the Remote
Transmitter Charging Jack.
2. Connect one of the charger connectors to the
Remote Transmitter Charging Jack.
3. Plug the charger into a standard wall outlet. The
red light will appear.
4. Charge the Remote Transmitter for 24 hours for
the fi rst charge. Recharges take only 12 hours.
Note: The Transmitter Indicator Light is solid green
after 12 hours of charging. For the fi rst charge, continue
to charge the Remote Transmitter for an additional 12
hours.
5. When charging is completed, replace the rubber
cover.
Charger connector placed
in the Remote Transmitter
Charging Jack
Note: Approximate battery life between charges is 40 to 60 hours, depending on frequency of use.
Transmitter Indicator Light - Function and Response
Condition
Dual Colour LED
RED LED GREEN LED
Normal Operation OFF OFF
Normal Operation - Low Battery Flashes 3 times every
5 seconds OFF
Tone OFF ON length of Remote
Transmitter button press
Correction ON length of Remote
Transmitter button
press OFF
Program Mode - Button Held ON length of button
press OFF
Program Mode - Button Released Flashes mode number OFF
Charging ON OFF
Charging Complete OFF ON
Step
1
400-1158-19.indd 6 400-1158-19.indd 6 9/25/09 10:41:04 AM 9/25/09 10:41:04 AM