Petsafe Basic Bark Control Collar - Manual (Page 5)

www.petsafe.net 5
How the PetSafe ® Bark Control Collar Works
Effective pet training requires consistency. The PetSafe ® Bark Control Collar
automatically and consistently corrects excessive barking in dogs. When the
vibration of your dog’s bark triggers the sensor probe, a static correction is
administered through the contact points. The Bark Control Collar starts with
the lowest level of correction and then increases through 6 levels each time
your dog barks within 30 seconds of the previous bark. If your dog does not
bark again within 30 seconds, the Bark Control Collar resets itself to the
lowest level of correction. Along with each static correction, there will be an
audible beep. For safety, the Bark Control Collar shuts off for 3 minutes if
your dog barks 15 times or more within 50 seconds.
Important: Before playing with your dog, remove the Bark Control Collar.
The activity may cause your dog to bark, which could lead to him associating
the play with the static correction.
Key Defi nitions
Contact Points: Deliver the safe
static correction.
Sensor Probe: Detects the
vibrations of your dog’s barking.
Note: The Sensor Probe is not
adjustable.
Low Battery Indicator: The
Indicator Light will begin fl ashing
when battery is low.
BA TTER
Y 6V
RF A-67
Battery
Contact Points
Washers
Sensor Probe
Low Battery
Indicator Light
(Underside)