Inserting the patio panel into the door track, Securing the height adjuster – Petsafe Deluxe Patio Panel Pet Door User Manual
Page 4
4
1-800-732-2677
www.petsafe.net
5
Inserting the Patio Panel into the Door Track
Important: Remove all packaging materials from Deluxe Patio Panel.
Note: If you purchased the 96” Patio Panel, please refer to the assembly instructions on page 8 before
proceeding to the installation.
The Deluxe Patio Panel inserts into the opening in your sliding glass door against the
doorjamb. Your sliding glass door will then close flush against the Deluxe Patio Panel.
1. Place the top of the Patio Panel in the top door track groove.
2. Position the bottom part of the Patio Panel into the bottom door track.
3. Move the Patio Panel against the doorjamb. The Patio Panel should fit flush against the
doorjamb without any gaps.
1
2
3
__________________________________________________________________________
Securing the Height Adjuster
The following steps will help to ensure that the
Height Adjuster stays in place over time.
Note: Make sure you are satisfied with the fit of the
Patio Panel before drilling.
1. Drill 7/64" holes through the four pre-drilled
holes on the interior and exterior side of the
Height Adjuster.
2. Secure the Height Adjuster to the Patio Panel
with four #6 x 5/8" sheet metal screws.
Pre-drilled
Holes
Height
Adjuster
Step
1
Step
2