Installing the glass sweep and weather stripping – Petsafe Deluxe Patio Panel Pet Door User Manual
Page 5
Advertising
4
1-800-732-2677
www.petsafe.net
5
Installing the Glass Sweep and Weather Stripping
Patio door shown here slightly open
Deluxe Patio Panel
Install Glass Sweep here
Install Weather-Stripping here
Glass Sweep
The Glass Sweep should be installed onto the BACK EDGE
of your sliding glass door to form a seal between the sliding
glass door and the stationary glass door.
1. Clean the back edge of your sliding glass door.
2. Position the Glass Sweep at the top of the door with the
flexible part touching the glass of the stationary door.
3. Carefully peel the backing and press the Glass Sweep in
place as you move down to the bottom of the door.
4. Trim any excess with scissors.
Step
3
Advertising
This manual is related to the following products: