Petsafe Drinkwell® Ceramic Lotus Pet Fountain - Manual (Page 2)

3 2
Ceramic Lotus Pet Fountain
Operating Guide
Table of Contents
Important Safety Instructions.............................................
Components.......................................................................
Operating Instructions........................................................
Fountain Disassembly & Cleaning ....................................
Replacing the Filter.............................................................
Pump Maintenance............................................................
Reassembly of Your Fountain............................................
Fountain & Your Environment............................................
Tips On Use.......................................................................
Manufacturer’s Safety Instructions..................................... 1
2
3
5
6
7
8
10
10
11
Main
Bowl
Pump
50 oz Water Capacity Components
As with any electrical device, check the electrical cord for any tears
or damage before use.
Make sure the inline plug is fully connected. (See Fig. 1)
The fountain will come partially assembled. Make sure the nut on the
bottom of the bowl is fully tightened and secure. (See Fig. 2)
DO NOT RUN DRY - FOR INDOOR USE ONLY
OPERATING INSTRUCTIONS
1)
2)
3)
Remove the housing by lifting straight up. Several parts will already
be in place, including: the foam filter, pump, intake tube, cord
pass-thru tube, gasket and the tube connector. (See Fig. 3a) Make
sure the electrical cord is secured in place by the clip on the tube
connector. (See Fig. 3b)
4)
Housing
U.S. Patents No. 5,799,609 and 5,842,437
5)
Fig. 1
Housing
Cap
Replace the housing by aligning the large gap at the bottom of the
housing with the raised bump on the bottom of the main bowl. The
gap in the housing is shown in Fig. 4a (next page) and the raised
bump is circled in Fig. 4b (next page). The housing should rest flat
and stable on the bottom of the bowl. If the housing is slightly raised
up or wobbles at all, it is placed incorrectly, remove and replace the
housing as instructed above until it rests flat.
Thank you for choosing the PetSafe brand. You and your pet deserve a
companionship that includes memorable moments and a shared understanding
together. Our products and training tools promote a lifestyle of protection, teaching
and love; essentials that influence memories for a lifetime. If you have any questions
about our products or training your pet, please visit our website at www.petsafe.net
or contact our Customer Care Center at 1-800-732-2677.
Upper
Dish
O-ring
Foam
Filter
Tube
Connector
Cord
Pass-Thru
Tube
Intake
Tube
Adaptor
Gasket
Nut
Fig. 2
Fig. 3a Fig. 3b