Tips on use – Petsafe Drinkwell® Ceramic Lotus Pet Fountain User Manual

Page 6

Advertising
background image

11

10

If you live in a humid environment and have problems with mold or algae

(the parts may feel “slimy”), simply soak all of the plastic parts (excluding

the pump) in a diluted bleach solution for about 10 minutes after regular

cleaning. We recommend using a solution that is 10% bleach and 90%

water. Pour some of the bleach solution down into the pump’s cavity as

well. You must be sure to rinse all the parts very thoroughly to remove all

the chlorine. The best way to rinse out the pump’s cavity is to hold it under

a weak stream of warm water. This is also an excellent way to disinfect

the fountain.

If you have “hard water” where you live, you may start to see white mineral

deposits on or down inside the pump. This may eventually prevent the

impeller from turning properly. To avoid having to replace the pump:

A. Clean the pump more frequently; or

B. Clean with regular white vinegar and let the vinegar soak for

several minutes down inside the pump’s cavity; or

C. Use bottled water.

FOUNTAIN & YOUR ENVIRONMENT

MANUFACTURER’S SAFETY

INSTRUCTIONS

The electrical use of this appliance

is 3 watts.

Close supervision is necessary when

any appliance is used by or near

children.

Always unplug any appliance when

not in use, before putting on or taking

off parts, and before cleaning. Never

yank on a cord to remove from the

outlet.

Do not use appliance for anything

other than intended use. The use of

attachments not recommended or

sold by the manufacturer may cause

an unsafe condition. Do not modify

the unit.

Do not install or store appliance

where it will be exposed to weather or

temperatures below freezing.

Read and observe all important

notices on the appliance.

Do not attempt repairs on the pump

yourself.

If the plug of this device gets wet,

turn off the electricity to that outlet.

Do not attempt to unplug.

To avoid the possibility of the plug or

outlet getting wet, the outlet should

always be above the level of the

fountain.

Examine this appliance after

installation. Do not plug in if there

is water on the cord or plug.

Do not operate any appliance if it

has a damaged cord or plug, or

if it is malfunctioning or has been

damaged.

If an extension cord is necessary,

a cord with a proper rating should

be used.

FOR INDOOR USE ONLY!

1) The fountain is meant to run continuously (always plugged into electricity),

as long as the water level is maintained and the fountain is cleaned

regularly. Be sure to check the fountain regularly to help prevent damage

to the pump, as the water may get consumed or evaporate causing the

pump to run dry.

2) Do not allow pets or children to chew on or swallow any parts. If you are

concerned about the power cord, purchase a cord conduit (a hard plastic

protector) at any hardware store.

3) Some animals have been known to be sensitive to plastic. If your animal

shows signs of an allergic reaction to the plastic, please discontinue use

until you have consulted with your veterinarian.

4)

Standard Safety Precautions:

When being introduced to the Drinkwell

®

Pet Fountain, your pet may

be cautious of this new and unusual object. After beginning operation

of your fountain, simply allow your pet to adjust at his or her own pace.

Some pets may take several days or longer to begin use.

Your pet may prefer that the fountain be placed away from their normal

feeding area. Try plugging it in somewhere else, like a laundry room, a

bathroom or another corner of the kitchen.

Add ice cubes to the bowl for refreshing, ice-cold running water!

TIPS ON USE

Advertising